FORCLIMA “K250B” e “K450B” are wholehouse heat recovery ducting system with up to 92% energy efficiency.
K250B e K450B are designed to be installed in high insulated buildings.
They can fit in flats, residential environments and in medium and light commercial places.
The 2 models have 2 fully adjustable speeds and a purge setting - maximum. On the front of the unit is a digital controller that can be used to pre-set the speeds to any required air-flow within the performance range.
The units can be mounted vertically in a roof space, and are suitable for wall mounting or within a kitchen cupboard. When mounted in an unheated area ducting should be insulated.
Ducting can be attached to the unit horizonally, vertically or both.
Left or right hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed onsite by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.
Horizontal and vertical spigots: The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied.
Condensate drain can be taken out through the back, bottom or front of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can
be completed after installation.
Efficiency: The unit should retain up to 92% of the temperature differential of out going air.
K250B has a max ventilation rate of 250 m³/h at 100 Pa.
K450B has a max ventilation rate of 450 m³/h at 130 Pa.
DOWNLOAD TECHNICAL DETAILS "K250B & K450B"
"K250B" & "K450B" can be combined with the new FORCLIMA Air distribution systems: DUCTPLUS SYSTEM